No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IFPPI_1.3.6.1.4.1.2011.5.25.315.3.6 hwMacTrapHashConflictAlarm

L2IFPPI_1.3.6.1.4.1.2011.5.25.315.3.6 hwMacTrapHashConflictAlarm

Description

L2IFPPI/4/MACHASHCONFLICTALARM:OID [oid] A hash conflict occurs in MAC addresses.(IfIndex=[INTEGER], MacAddr=[OPAQUE], VLAN=[GAUGE], VsiName=[OCTET1], InterfaceName=[OCTET2]).

The MAC address hash conflict occurred.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.315.3.6 Warning environmentalAlarm(6)

Parameters

Name Meaning

oid

Indicates the ID of a MIB object.

IfIndex

Indicates the interface index.

MacAddr

Indicates the MAC address.

VLAN

Indicates the VLAN ID.

VsiName

Indicates the name of a VSI.

InterfaceName

Indicates the interface name.

Impact on the System

The MAC address table space is not full and the MAC address entry cannot be learned.

Possible Causes

The MAC address hash conflict occurred.

Procedure

  1. Run the display mac-address summary command to check whether the usage of MAC address entry resources exceeds 80% on the device.

    • If so, go to Step 4.
    • If not, go to Step 2.

  2. Run the mac-address hash-mode command to change the MAC hash algorithm. Then check whether the alarm is cleared.

    • If so, no further action is required.
    • If not, go to Step 3.
    NOTE:
    • MAC addresses are distributed on a network randomly, so the best hash algorithm cannot be determined. Generally, it is recommended to use the default MAC hash algorithm unless you have specific requirements.

    • An appropriate hash algorithm can reduce hash conflicts, but cannot prevent them.

    • After the hash algorithm is changed, restart the switch to make the configuration take effect.

  3. Obtain the location of the device on which the MAC address hash conflict occurs based on the MAC address and interface name in the alarm information. Adjust the plan and modify the VLAN configuration of the device access interface to assign the device to another VLAN. Then check whether the alarm is cleared.

    • If so, no further action is required.
    • If not, go to Step 4.

  4. Re-plan network deployment, migrate the services on the device corresponding to the MAC address in the alarm information to other devices with sufficient MAC address entry resources, and check whether the alarm is cleared.

    • If so, no further action is required.
    • If not, go to Step 5.

  5. Replace the device with another one that has larger MAC address entry resource specifications and check whether the alarm is cleared.

    • If so, no further action is required.
    • If not, go to Step 6.

  6. Collect trap, log, and configuration information, and contact technical support personnel.

Related Information

None

Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 158668

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next