No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE_1. hwPoePdClassOvercurrent

POE_1. hwPoePdClassOvercurrent


POE/4/PDCLASSOVERCURRENT: OID [oid] has detected a classfication overcurrent PD and power denied.(IfIndex=[INTEGER], Interface="[OCTET]")

The system detects that overcurrent occurs during PD classification.


Alarm ID Alarm Severity Alarm Type Warning communicationsAlarm(2)


Name Meaning
oid Indicates the MIB object ID of the alarm.
IfIndex Indicates the interface index.
Interface Indicates the interface name.

Impact on the System

Services are not affected.

Possible Causes

The PD does not comply with standards.


  1. Run the poe high-inrush enable slot slot-id command in the system view to allow high inrush current during power-on and then check whether the alarm is cleared.

    If so, the alarm handling ends.

    If not, go to step 2.

  2. Replace the PD with a standard PD and then check whether the alarm is cleared.

    If so, the alarm handling ends.

    If not, collect alarm information and configuration information, and then contact technical support personnel.

Related Information


Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 155061

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next