No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE_1.3.6.1.4.1.2011.5.25.195.40.3 hwPoePowerOn

POE_1.3.6.1.4.1.2011.5.25.195.40.3 hwPoePowerOn

Description

POE/4/POWERON: OID [oid] PD powered on.(IfIndex=[INTEGER], Interface="[OCTET]")

The interface meets the following power supply conditions:

1. The power is sufficient.

2. The PD is identified by the system.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.195.40.3 Warning communicationsAlarm(2)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
IfIndex Indicates the interface index.
Interface Indicates the interface name.

Impact on the System

Services are not affected.

Possible Causes

The alarm recovery message is generated after power-off.

Procedure

  1. This alarm indicates that a fault is rectified, and no action is required.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141873

Views: 124598

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next