No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1. ospfIfRxBadPacket

OSPF_1. ospfIfRxBadPacket


OSPF/4/IFBADRX:OID [oid]: An OSPF packet that is received on a non-virtual interface cannot be parsed. (IfIpAddress=[ip-address], AddressLessIf=[interface-index], ProcessId=[process-id], RouterId=[router-id], PacketSrc=[source-ip-address], PacketType=[packet-type], InstanceName=[instance-name])

An OSPF packet that cannot be parsed was received from a non-virtual-link interface. The possible cause was that the device was attacked or the interconnection between the Huawei device and non-Huawei device failed.


Alarm ID Alarm Severity Alarm Type Warning environmentalAlarm (6)


Name Meaning


Indicates the MIB object ID of the alarm.


Indicates the IP address of the non-virtual-link interface.


Indicates the index of the interface.


Indicates the process ID.


Indicates the ID of the local switch.


Indicates the source IP address of the packet.


Indicates the type of the packet.
  • 1: Hello packet
  • 2: DD packet
  • 3: Request packet
  • 4: Update packet
  • 5: Acknowledgement packet
  • 6: Update packet Retrans
  • 7: Update packet flood


Indicates the instance name.

Impact on the System

This trap message is generated when a common interface receives an incorrect packet and then discards this packet. This may cause the neighbor to be Down.

Possible Causes

An incorrect packet was received from the non virtual-link interface on the peer end.


  1. Collect alarm information and configuration information, and then contact technical support personnel.
  2. End.

Related Information


Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 158265

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next