No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE_1.3.6.1.4.1.2011.5.25.32.4.1.14.1 hwXQoSStormControlTrap

SECE_1.3.6.1.4.1.2011.5.25.32.4.1.14.1 hwXQoSStormControlTrap

Description

SECE/4/TRAP:STORMCONTROL:OID [oid],StormControlAlarm(IfIndex:[INTEGER] BroadcastMinRate:[INTEGER] BroadcastMaxRate:[INTEGER]

MulticastMinRate:[INTEGER] MulticastMaxRate:[INTEGER] Action:[INTEGER] Interval:[INTEGER] Status:[INTEGER] UnicastMinRate:[INTEGER] UnicastMaxRate:[INTEGER] BroascastMode:[INTEGER] MulticastMode:[INTEGER] UnicastMode:[INTEGER])

The interface status changed.

Status of the interface can be :
  • block: When the rate of receiving packets is greater than the value of MaxRate and the storm control action is block, the interface status is block.
  • normal: Packets are normally forwarded.
  • error-down: When the rate of receiving packets is greater than the value of MaxRate and the storm control action is error-down, the interface status is error-down.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.32.4.1.14.1 Warning securityServiceOrMechanismViolation(10)

Parameters

Name Meaning
OID Indicates the ID of the MIB object.
IfIndex Indicates the interface index.
BroadcastMinRate Indicates the minimum rate of broadcast packets.
BroadcastMaxRate Indicates the maximum rate of broadcast packets.
MulticastMinRate Indicates the minimum rate of multicast packets.
MulticastMaxRate Indicates the maximum rate of multicast packets.
Action Indicates the storm control action.
Interval Indicates the interval for detecting storms.
Status Indicates the interface status.
UnicastMinRate Indicates the minimum rate of unknown unicast packets.
UnicastMaxRate Indicates the maximum rate of unknown unicast packets.
BroascastMode Indicates the storm control mode of broadcast packets.
MulticastMode Indicates the storm control mode of multicast packets.
UnicastMode Indicates the storm control mode of unknown unicast packets.

Impact on the System

Storms may occur if the threshold is exceeded. Services are affected.

Possible Causes

The interface traffic volume was greater than the upper threshold or less than the lower threshold.

Procedure

  1. Run the display storm-control interface command to check the storm control configuration on the interface.
  2. If the interface status is error-down, check whether the interface can be enabled according to the application scenario.

    • If so, run the shutdown and undo shutdown commands manually. No further action is required.

    • If not, go to step 3.

  3. Collect alarm, log, and configuration information, and contact technical support personnel.

Related Information

None

Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 158393

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next