No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYEXTTRAP_1.3.6.1.4.1.2011.5.25.31.2.2.8 hwEntityHigErrorPacketThresholdAlarm

ENTITYEXTTRAP_1.3.6.1.4.1.2011.5.25.31.2.2.8 hwEntityHigErrorPacketThresholdAlarm

Description

ENTITYEXTTRAP/2/PKTERRORRISING:OID [oid] Input packets are discarded for an error in physical layer detection. (SlotID=[STRING], UnitID=[INTEGER], PortID=[STRING], PeerSlotID=[STRING], ErrorPacketStatistics=[STRING], ErrorPacketThreshold=[STRING], MonitorInterval=[STRING])

The total number of error packets on an HG channel or stack port exceeds the alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.31.2.2.8 Major communicationsAlarm(2)

Parameters

Name Meaning
OID Indicates the ID of a MIB object.
SlotID Indicates the slot ID.
UnitID Indicates the chip ID.
NOTE:

The value is 0 or 1 for the HG channel or 65535 (an invalid value) for a stack port.

PortID Indicates the port number of the HG channel or stack port.
PeerSlotID Indicates the slot ID of the remote card.
ErrorPacketStatistics Indicates the total number of error packets.
ErrorPacketThreshold Alarm threshold for error packets.
MonitorInterval Indicates the detection interval.

Impact on the System

The HG channel or stack port cannot forward packets normally. During inter-card or inter-device traffic forwarding, packets are lost or cannot be forwarded.

Possible Causes

  • The device is faulty.

Procedure

  1. Replace the device.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141873

Views: 148816

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next