No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE_1.3.6.1.4.1.2011.5.25.32.4.1.14.2 hwXQoSStormControlTrapExt

SECE_1.3.6.1.4.1.2011.5.25.32.4.1.14.2 hwXQoSStormControlTrapExt

Description

SECE/4/TRAP:STORMCONTROL:OID [oid] StormControlAlarm.(IfIndex=[INTEGER], IfName=[OCTET], BroadcastMinRate=[INTEGER], BroadcastMaxRate=[INTEGER], MulticastMinRate=[INTEGER], MulticastMaxRate=[INTEGER], Action=[INTEGER], Interval=[INTEGER], Status=[INTEGER], UnicastMinRate=[INTEGER], UnicastMaxRate=[INTEGER], BroadcastMode=[INTEGER], MulticastMode=[INTEGER], UnicastMode=[INTEGER])

The interface status changed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.32.4.1.14.2 Warning securityServiceOrMechanismViolation(10)

Parameters

Name Meaning
OID Indicates the ID of a MIB object.
IfIndex Indicates the interface index.
IfName Indicates the interface name.
BroadcastMinRate Indicates the minimum rate of broadcast packets.
BroadcastMaxRate Indicates the maximum rate of broadcast packets.
MulticastMinRate Indicates the minimum rate of multicast packets.
MulticastMaxRate Indicates the maximum rate of multicast packets.
Action Indicates the storm control action.
Interval Indicates the interval for detecting storms.
Status Indicates the interface status, including:
  • block: When the rate of receiving packets is greater than the value of MaxRate and the storm control action is block, the interface status is block.
  • normal: The interface normally forwards packets.
  • shutdown: When the rate of receiving packets is greater than the value of MaxRate and the storm control action is shutdown, the interface status is shutdown.
UnicastMinRate Indicates the minimum rate of unknown unicast packets.
UnicastMaxRate Indicates the maximum rate of unknown unicast packets.
BroadcastMode Indicates the broadcast storm control mode.
MulticastMode Indicates the multicast storm control mode.
UnicastMode Indicates the unknown unicast storm control mode.

Impact on the System

Storms may occur if any of the preceding thresholds is exceeded. Services are affected.

Possible Causes

The packet rate (pps) on the interface exceeded the upper threshold or fell below the lower threshold for storm control.

Procedure

  1. Run the display storm-control [ interface interface-type interface-number ] command to view information about storm control on the interface.
  2. If the interface status is shutdown, check whether the interface can be enabled according to the application scenario.

    • If the interface can be enabled, run the undo shutdown command and no further action is required.
    • If the interface cannot be enabled, go to step 3.

  3. Collect alarm, log, and configuration information, and contact technical support personnel.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141873

Views: 112954

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next