No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SRM_1.3.6.1.4.1.2011.5.25.129.2.1.14 hwPortPhysicalAutoNegotiateFail

SRM_1.3.6.1.4.1.2011.5.25.129.2.1.14 hwPortPhysicalAutoNegotiateFail

Description

SRM/3/PortAutoNegotiateFailAlarm:OID [oid] port auto negotiation failed. (EntityPhysicalIndex=[INTEGER], BaseTrapSeverity=[INTEGER], BaseTrapProbableCause=[INTEGER], BaseTrapEventType=[INTEGER], EntPhysicalName=[OCTET], RelativeResource="[OCTET]")

Auto-negotiation on an interface has failed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.129.2.1.14 Minor equipmentAlarm (5)

Parameters

Name Meaning

OID

Indicates the ID of a MIB object.

EntityPhysicalIndex

Indicates a physical entity index.

BaseTrapSeverity

Indicates the alarm severity.

BaseTrapProbableCause

Indicates the error code of the alarm.

BaseTrapEventType

Indicates the event type.

EntPhysicalName

Indicates the physical entity name.

RelativeResource

Indicates a sub-entity.

Impact on the System

The interface turns to Down state.

Possible Causes

Negotiation with the remote interface fails.

Procedure

  1. Check whether the remote interface is working in auto-negotiation mode. If not, enable auto-negotiation on the remote interface.
  2. If the remote interface is working in auto-negotiation mode but is abnormal, connect the local interface to another interface.
  3. If the negotiation still fails, contact technical support personnel.

Related Information

None

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141873

Views: 148798

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next