No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IFPPI_1.3.6.1.4.1.2011.5.25.315.3.9 hwPortsecStaticFlpAlarm

L2IFPPI_1.3.6.1.4.1.2011.5.25.315.3.9 hwPortsecStaticFlpAlarm

Description

L2IFPPI/4/PORTSECSTATICFLP: OID [OID] Interface received a packet with flapping static MAC.(MACAddr=[OPAQUE], VLAN=[GAUGE], VsiName=[OCTET], IfIndex=[INTEGER], InterfaceName=[OCTET]).

The source MAC address in the packet received by an interface already existed in the static MAC table of another interface.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.315.3.9 Warning qualityOfServiceAlarm(3)

Parameters

Name Meaning

OID

Indicates the trap OID.

MACAddr

Indicates the MAC address.

VLAN

Indicates the VLAN ID.

VsiName

Indicates the name of a VSI.

IfIndex

Indicates the interface index.

InterfaceName

Indicates the interface name.

Impact on the System

The interface will discard this packet.

Possible Causes

An interface with port security enabled received a packet, and the source MAC address in the packet already existed in the static MAC table of another interface.

Procedure

  1. Check whether this packet needs to be processed.

    • If so, go to step 2.
    • If not, no further action is required.

  2. Run the display mac-address [ vlan vlan-id | interface-type interface-number ] * command to check the interface corresponding to the MAC address in the packet, and then run the undo mac-address [ interface-type interface-number | vlan vlan-id ] * command to delete the existing MAC address entry.
Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 156031

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next