No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LLDP_1.3.6.1.4.1.2011.5.25.134.2.5 hwLldpLocManIPAddrChange

LLDP_1.3.6.1.4.1.2011.5.25.134.2.5 hwLldpLocManIPAddrChange

Description

LLDP/4/ADDCHGTRAP: OID [oid] Local management address is changed. (LocManAddr=[STRING])

The LLDP management address of a device was changed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.134.2.5 Warning equipmentAlarm(5)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
LocManAddr Indicates the local LLDP management address.

Impact on the System

This alarm is a notification of the change of the network topology for the NMS, and does not affect services.

Possible Causes

  • The LLDP management address of a device was changed by running the lldp management-address command manually.
  • The lldp management-address command was not configured on the device, but IP addresses of some interfaces changed. As a result, the LLDP management address changed.

Procedure

  1. Check whether the local LLDP management address is the same as the planned one.

    • If so, this alarm is informational only, and no action is required.
    • If not, go to step 2.

  2. Run the lldp management-address command in the system view, and configure the local LLDP management address to the planned IP address.

Related Information

None

Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 156141

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next