No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.2.1.14.16.2.18 ospfRestartStatusChange

OSPF_1.3.6.1.2.1.14.16.2.18 ospfRestartStatusChange

Description

OSPF/3/RESTARTCHG:OID [oid]: The GR status changes. (ProcessId=[process-id], RouterId=[router-id], RestartStatus=[gr-reason], RestartInterval=[gr-value], RestartExitReason=[quit-reason], InstanceName=[instance-name])

The GR status of the switch changed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.2.1.14.16.2.18 Minor environmentalAlarm (6)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

ProcessId

Indicates the process ID.

RouterId

Indicates the ID of the switch that generates the trap message.

RestartStatus

Indicates the reason of entering GR.
  • 1: NOT RESTARTING
  • 2: PLANNED RESTART
  • 3: UNPLANNED RESTART

RestartInterval

Indicates the GR period.

RestartExitReason

Indicates the reason why the switch exits from GR.
  • 1: not attempted
  • 2: restart/helper in progress
  • 3: restart/helper completed successfully
  • 4: restart/helper exit because of timeout
  • 5: restart/helper exit because of topology changed

InstanceName

Indicates the instance name.

Impact on the System

This trap message is generated when a switch enters the GR state or leaves the GR state. GR failure affects the normal forwarding of routes.

Possible Causes

1. The switch exited from GR.

2. The switch entered GR.

Procedure

  1. Perform the following configurations as required:

    • If the active/standby switchover is performed manually or the OSPF process is restarted through GR, go to Step 3.

    • If this trap is generated without any manual operation, go to Step 2.

  2. Collect alarm information and configuration information, and then contact technical support personnel.
  3. End.

Related Information

None

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141873

Views: 127744

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next