No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RMON_1. fallingAlarm

RMON_1. fallingAlarm


RMON/4/ALARMFALL:OID [OID] Alarm table [alarm-table-index] monitors [sample-object-oid] with the sample type being [sample-type], and the sampled alarm value [alarm-value] is less than or equal to [falling-value].

The value of the alarm entity was lower than fallingthreshold.


Alarm ID Alarm Severity Alarm Type Warning environmentalAlarm(6)


Name Meaning


Indicates the MIB object ID of the alarm.


Indicates the index of the alarm entry.


Indicates the OID of the sampled object.


Indicates the type of the sampled alarm.


Indicates the alarm value.


Indicates the lower threshold of the alarm.

Impact on the System


Possible Causes

Cause 1:

If the current sampled value was less than or equal to this threshold, and the last sampled value was greater than this threshold, the alarm was generated.

Cause 2:

After this alarm entry became valid, when the first sampled value was less than or equal to this threshold, and the values of fallingAlarm, risingAlarm, and risingOrFallingAlarm were equal, the alarm was generated.


  • This alarm is triggered only when the lower interface traffic monitoring threshold configured using the rmon alarm command is reached. It is a user-configured monitoring alarm and does not affect services. Therefore, no action is required.

Related Information


Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 158618

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next