No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FSP_1.3.6.1.4.1.2011.5.25.183.1.22.12 hwPhyStackPortIsUp

FSP_1.3.6.1.4.1.2011.5.25.183.1.22.12 hwPhyStackPortIsUp

Description

FSP/4/STACKPORTISUP: OID [OID] Stack port [octet] state has changed to up.

A member port that has been added to a logical stack port becomes Up.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.183.1.22.12 Warning communicationsAlarm(2)

Parameters

Name Meaning
OID Indicates the ID of the MIB object.
[octet]

Indicates the name of the local interface.

Impact on the System

None

Possible Causes

A member port that has been added to a logical stack port becomes Up after the cable is connected correctly.

Procedure

  1. This alarm message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141873

Views: 149486

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next