No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SRM_1.3.6.1.4.1.2011.5.25.129.2.1.9 hwEntityInvalid 67591

SRM_1.3.6.1.4.1.2011.5.25.129.2.1.9 hwEntityInvalid 67591

Description

SRM/3/ENTITYINVALID:OID [OID] Fan loss.(EntityPhysicalIndex[INTEGER1], BaseTrapSeverity=[INTEGER2], BaseTrapProbableCause=[INTEGER3], BaseTrapEventType=[INTEGER4], EntPhysicalContainedIn=[INTEGER5], EntPhysicalName=[OCTET1], RelativeResource=[OCTET2], ReasonDescription=[OCTET3])

A fan module does not work normally.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.129.2.1.9 Minor equipmentAlarm(5)

Parameters

Name Meaning
OID OID of the MIB
EntityPhysicalIndex Entity index
BaseTrapSeverity Severity code
BaseTrapProbableCause Error Code
BaseTrapEventType Code of the event type
EntPhysicalContainedIn Entity code
EntPhysicalName Entity name
RelativeResource Name of the affected component
ReasonDescription Fault description

Impact on the System

When the fan module fails to work normally, card temperature will increase, which may result in packet loss or even more seriously, failure of the switch to respond or unexpectedd restart.

Possible Causes

The cable of the fan module was connected loosely or the fan hardware was faulty.

Procedure

  1. Remove and insert the fan module and check whether the fault is rectified.

    (1) If the fault persists, the fan hardware is faulty. In this case, replace the fan module.

    (2) If the fault is rectified, go to Step 2.

  2. End.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141873

Views: 148212

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next