No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE_1.3.6.1.4.1.2011.5.25.195.40.20 hwPoePowerAbsent

POE_1.3.6.1.4.1.2011.5.25.195.40.20 hwPoePowerAbsent

Description

POE/4/POEPWABSENT:OID [OID] POE Power is absent.(FrameID = [INTEGER], SlotID = [INTEGER])

An alarm is triggered when no PoE power module on a PoE device is working properly.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.195.40.20 Warning equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the MIB object ID of the alarm.
FrameID Indicates the chassis ID of a device in a stack.
SlotID Indicates the slot ID of the PoE power module.

Impact on the System

Services are not affected.

Possible Causes

No PoE power module on the PoE device is working properly.

Procedure

  1. Run the display device command to check whether power modules of the PWR or PWH type are properly installed.

    • If not, install a PoE power module. The alarm handling ends.
    • If so, go to step 2.

  2. Run the display poe information command to check whether the power of the PoE power module is in the normal range.

    • If so, collect alarm information and configuration information, and then contact technical support personnel.
    • If not, replace this PoE power module.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141873

Views: 150084

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next