No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AAA_1.3.6.1.4.1.2011.5.2.2.2.0.53 hwMacMovedQuietMaxUserAlarm

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.53 hwMacMovedQuietMaxUserAlarm

Description

AAA/4/MACMOVEDQUIETMaxUserAlarm: OID [OID] The number of mac moved quiet users reached the maximum.(Spec of User Num:[INTEGER1] Current Threshold:[INTEGER2] Lower Threshold:[INTEGER3]% Upper Threshold:[INTEGER4]%)

The percentage of current MAC address migration users in quiet state against the maximum number of users exceeds the upper alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.2.2.2.0.53 Warning qualityOfServiceAlarm(3)

Parameters

Name Meaning
[OID] Indicates the MIB object ID of the alarm.
Spec of User Num: [INTEGER1] Indicates the maximum number of MAC address migration users in quiet state.
Current Threshold:[INTEGER2] Indicates the percentage of current MAC address migration users in quiet state against the maximum number of users.
Lower Threshold:[INTEGER3]% Indicates the lower alarm threshold for the percentage of MAC address migration users in quiet state against the maximum number of users.
Upper Threshold:[INTEGER4]% Indicates the upper alarm threshold for the percentage of MAC address migration users in quiet state against the maximum number of users.

Impact on the System

None

Possible Causes

The percentage of current MAC address migration users in quiet state against the maximum number of users exceeds the upper alarm threshold.

Procedure

  1. Run the display authentication mac-move configuration command in any view to check whether the upper threshold of MAC address migration users in quiet state is set.

    • If it is configured, consider whether to delete it.
    • If it is not configured, adjust the network based on the number of access users. If the problem persists, go to 2.

  2. Collect log information and contact technical support personnel.
Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 155307

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next