No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VBST_1.3.6.1.4.1.2011.5.25.323.2.3 hwVbstPVNumExceeded

VBST_1.3.6.1.4.1.2011.5.25.323.2.3 hwVbstPVNumExceeded

Description

VBST/4/PORTVLANEXCEED:OID [OID] The limit of port-VLAN exceeded.(entPhysicalIndex=[ULONG],entPhysicalName=[STRING],MaxNum=[ULONG])

The number of interfaces and VLANs participating in VBST calculation exceeded the maximum number of interfaces and VLANs allowed by VBST.

NOTE:

These alarms can be only queried through a command but not the MIB.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.323.2.3 Warning qualityOfServiceAlarm(3)

Parameters

Name Meaning
OID Indicates the ID of a MIB object.
entPhysicalIndex Indicates the index of the slot number participating in VBST calculation.
entPhysicalName Indicates the name of the slot number participating in VBST calculation.
MaxNum Indicates the number of interfaces and VLANs participating in VBST calculation.

Impact on the System

  • The VBST calculation efficiency will be affected, delaying network loop breaking.
  • The CPU usage may become high, the calculation of other protocols is affected, and even the device may fail to be managed by the NMS.

Possible Causes

VBST performed spanning tree calculation based on VLANs. As a result, all the interfaces added to a VLAN participated in VBST calculation by default.

Procedure

  1. Check whether all the interfaces participating in VBST calculation must be added to the VLAN.

    • If it is unnecessary, remove some interfaces from the VLAN and check whether the alarm is cleared. If the alarm persists, go to step 2.
    • If it is necessary, go to step 2.

  2. Run the stp disable command in the views of the interfaces that do not need to participate in VBST calculation to disable interfaces from performing spanning tree calculation. Check whether the alarm is cleared. If the alarm persists, go to step 3.
  3. Collect alarm, log, and configuration information, and contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141873

Views: 149105

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next