No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFPDT_1.3.6.1.4.1.2011.5.25.315.3.8 hwTrunkMemSpeedDifferentResume

IFPDT_1.3.6.1.4.1.2011.5.25.315.3.8 hwTrunkMemSpeedDifferentResume

Description

IFPDT/4/MEMSPEEDSAME: OID [OID] The active member ports in trunk have consistent bandwidth. (TrunkIfIndex=[INTEGER], TrunkName=[OCTET])

The rates of active interfaces of the Eth-Trunk were the same.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.315.3.8 Warning equipmentAlarm(5)

Parameters

Name Meaning

OID

Indicates the ID of a MIB object.

TrunkIfIndex

Indicates the index of an Eth-Trunk.

TrunkName

Indicates the name of an Eth-Trunk.

Impact on the System

The rates of active interfaces of the Eth-Trunk are changed to be the same. There is no impact on the system.

Possible Causes

The rates of active interfaces of the Eth-Trunk were changed to be the same.

Procedure

  • This alarm is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141873

Views: 149056

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next