No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFNET_1. hwIfNameChangeResume

IFNET_1. hwIfNameChangeResume


IFNET/1/IF_CHANGE_RESUME:OID [oid] When a multi-chassis restore a single-chassis device, the interface information is changed.

The multi-chassis device was changed back into the single-chassis device, and consequently the interface information was changed.


Alarm ID Alarm Severity Alarm Type Critical equipmentAlarm(5)


Name Meaning


Indicates the MIB object ID of the alarm.

Impact on the System

An interface is no longer defined in four dimensions, but in three dimensions.

Possible Causes

The device was reverted from a multi-chassis device to a single-chassis device.


  1. This alarm message is informational only, and no action is required.
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 158308

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next