No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTMIB_1.3.6.1.2.1.47.2.0.1 entConfigChange

ENTMIB_1.3.6.1.2.1.47.2.0.1 entConfigChange

Description

ENTMIB/4/TRAP: OID [oid] Entity MIB change.

The MIB information changes because an entity in a device is installed, removed, reset, or registered.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.2.1.47.2.0.1 Warning equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the ID of the MIB object.

Impact on the System

None.

Possible Causes

An entity (a board or a subcard) on a device is installed, removed, reset, or registered.

Procedure

  1. This is a normal notification and no action is required.

Related Information

None.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141873

Views: 112863

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next