No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RDS_1.3.6.1.4.1.2011.5.25.40.15.2.2.1.4 hwRadiusAcctServerDown

RDS_1.3.6.1.4.1.2011.5.25.40.15.2.2.1.4 hwRadiusAcctServerDown

Description

RDS/4/RDACCTDOWN_WARNING:OID [oid] Communication with the RADIUS accounting server is interrupted. (IP=[ip-address], Vpn-Instance:[vpn-instance-name])

The communication with the RADIUS accounting server is interrupted.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.40.15.2.2.1.4 Warning

communicationsAlarm(2)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
ip-address Indicates the IP address of the accounting server.
vpn-instance-name VPN Instance. This parameter is invalid.

Impact on the System

The communication with the RADIUS accounting server is interrupted.

Possible Causes

The RADIUS accounting server is Down.

Procedure

  1. Check whether the RADIUS accounting server is closed.

    • If yes, no action is required.
    • If no, perform 2.

  2. Check whether the link is normal, and whether the RADIUS server and the device can ping through each other.

    • If the link is abnormal, restore the link.
    • If the link is normal, perform 3.

  3. Check whether the configured shared key is correct, and then run the display radius-server configuration command.

    • If the shared key is incorrect, you need to run the radius-server shared-key cipher key-string command to configure the shared key for the RADIUS server.
    • If the shared key is correct, you need to perform 4.

  4. Contact the technical personnel.
Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 155431

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next