No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2BPTNL_1.3.6.1.4.1.2011.5.25.42.2.1.7.15 hwL2ProtocolTunnelDropThresholdRaising

L2BPTNL_1.3.6.1.4.1.2011.5.25.42.2.1.7.15 hwL2ProtocolTunnelDropThresholdRaising

Description

L2BPTNL/1/L2BPTNL_DROP_THRESHOLD_ALARM:OID [oid] The number of the protocol transmit on the port reach the drop threshold. (PortName=[OCTET], ProtocolName=[OCTET], Dropthreshold=[INTEGER])

The number of Layer 2 protocol packets transmitted on the interface enabled with Layer 2 protocol transparent transmission reached the threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.42.2.1.7.15 Critical communicationsAlarm (2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

PortName

Name of the interface that is enabled with Layer 2 protocol transparent transmission

ProtocolName

Name of the protocol whose packets are transparently transmitted

Dropthreshold

Threshold for discarding Layer 2 protocol packets

Impact on the System

Services will not be affected.

Possible Causes

The interface enabled with Layer 2 protocol transparent transmission was configured with the threshold for discarding Layer 2 protocol packets, and the number of Layer 2 protocol packets that were transparently transmitted on the interface reached the threshold.

Procedure

  • Run the display l2protocol-tunnel statistics command to check the number of discarded packets and check whether insecure attack packets cause excessive transparently transmitted packets.

    • If there are attack packets, configure security functions to block these packets.
    • If there are no attack packets, no handling is required. If the threshold for discarding Layer 2 protocol packets on an interface enabled with Layer 2 protocol transparent transmission needs to be reconfigured, run the l2protocol-tunnel drop-threshold command.

Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 157912

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next