No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.3 hwBoardFail 132185

ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.3 hwBoardFail 132185

Description

ENTITYTRAP/2/BOARDFAIL: OID [oid] Board become failure for some reason. (Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapEntType=[INTEGER], EntityTrapFaultID=[INTEGER], EntityTrapReasonDescr="[OCTET]")

Some functions on the card failed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.2.3 Major equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the ID of a MIB object.
Index Indicates the index.
EntityPhysicalIndex Indicates the physical entity index.
PhysicalName Indicates the entity name.
EntityTrapEntType Indicates the physical entity type.
EntityTrapFaultID Indicates the error code of the alarm, which is 132185.
EntityTrapReasonDescr Indicates the reason description of the alarm.

Impact on the System

1. Communication over optical interfaces may fail.

2. Internal forwarding chips may be faulty, and the card becomes unavailable.

Possible Causes

The internal IIC module of the card was faulty.

Procedure

  1. Wait for a period to check whether the fault is rectified. If not, go to step 2.
  2. Replace the faulty component or the card.
Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 157884

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next