No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1. hwBoardInvalid 132626

ENTITYTRAP_1. hwBoardInvalid 132626


Entitytrap/1/BOARDINVALID:OID [oid] Board is invalid for some reason. (Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapEntType=[INTEGER], EntityTrapFaultID=[INTEGER])

The board fails.


Alarm ID Alarm Severity Alarm Type Critical equipmentAlarm(5)


Name Meaning
OID Indicates the ID of the MIB object.
Index Indicates the index.
EntityPhysicalIndex Indicates the physical index.
PhysicalName Indicates the entity name.
EntityTrapEntType Indicates the entity type.
EntityTrapFaultID Indicates the error code.

Impact on the System

Services on the device are interrupted.

Possible Causes

Cause 1: The power cable connected to the device is loose.

Cause 2: The external power line is faulty.

Cause 3: The power module of the device has failed.


  1. Check whether the power cable is loose. If so, reconnect the power cable securely and power on the device.
  2. Check whether the external power line is faulty. If so, repair or replace the faulty line and power on the device again.
  3. Check whether the power module of the device is faulty. If so, replace the power module. If the device uses a built-in power module, replace the device.

Related Information


Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 158582

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next