No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DOT1X_1. hwSrvcfgEapMaxUserAlarm

DOT1X_1. hwSrvcfgEapMaxUserAlarm


DOT1X/4/8021XREACHMAXNUM:OID [OID] The number of users has reached the max number.(PortIndex=[INTEGER], PortName=[OCTET])

The number of 802.1X authentication users reaches the upper limit.


Alarm ID Alarm Severity Alarm Type Warning processingErrorAlarm(4)


Name Meaning
OID Indicates the MIB object ID of the alarm.
PortIndex Indicates the access interface index.
PortName Indicates the access interface name.

Impact on the System

Users cannot access through this interface.

Possible Causes

The number of 802.1X authentication users reaches the upper limit.


  1. Run the display access-user interface interface-type interface-number command to check whether online 802.1X authentication users are proper.

    • If so, replace the device with a higher-performance device.
    • If not, replan the network.

  2. Collect log information and contact technical support personnel.
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 158597

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next