Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration
Procedure
- Run the display traffic classifier user-defined [ classifier-name ] command to check the traffic classifier configuration.
- Run the display traffic behavior user-defined [ behavior-name ] command to check the traffic behavior configuration.
Run the display traffic policy user-defined [ policy-name [ classifier classifier-name ] ] command to check the user-defined traffic policy configuration.
Run the display traffic-applied [ interface [ interface-type interface-number ] | vlan [ vlan-id ] ] { inbound | outbound } [ verbose ] command to check information about ACL-based simplified and MQC-based traffic policies applied to the system, a VLAN, or an interface.
Run the display traffic policy { interface [ interface-type interface-number ] | vlan [ vlan-id ] | global } [ inbound | outbound ] command to check the traffic policy configuration.
Run the display traffic-policy applied-record [ policy-name ] command to check the application record of a specified traffic policy.
