No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R010C00 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Portal Authentication Configuration

Verifying the Portal Authentication Configuration

Context

You can run the commands to check the configured parameters after completing the Portal authentication configuration.

Procedure

  • When an external Portal server is used, run the following commands to check the configuration.

    • Run the display portal [ interface vlanif interface-number ] command to check the Portal authentication configuration on the VLANIF interface.
    • Run the display web-auth-server configuration command to check the configuration of the Portal authentication server.
    • Run the display server-detect state [ web-auth-server server-name ] command to check the status of a Portal server.
    • Run the display user-group [ group-name ] command to check the user group configuration.
    • Run the display access-user user-group group-name command to check summary information about online users in a user group.
    • Run the display static-user [ domain-name domain-name | interface interface-type interface-number | ip-address start-ip-address [ end-ip-address ] ] * command to check the static user information.
    • Run the display portal quiet-user { all | server-ip ip-address | user-ip ip-address } command to check information about Portal authentication users in quiet state.
    • Run the display portal user-logout [ ip-address ip-address ] command to check the temporary logout entries of Portal authentication users.
    • Run the display aaa statistics access-type-authenreq command to display the number of authentication requests.

  • When a built-in Portal server is used, run the following commands to check the configuration.

    • Run the display portal local-server command to check the configuration of a built-in Portal server.
    • Run the display portal local-server connect [ user-ip ip-address ] command to check the connection status of Portal authentication users on the built-in Portal server.
    • Run the display static-user [ domain-name domain-name | interface interface-type interface-number | ip-address start-ip-address [ end-ip-address ] ] * command to check the static user information.
    • Run the display portal quiet-user { all | server-ip ip-address | user-ip ip-address } command to check information about Portal authentication users in quiet state.
    • Run the display portal local-server page-information command to check the page files loaded to the memory of a built-in Portal server.

  • Run the display portal free-rule [ rule-id ] command to check authentication-free rules for Portal authentication users.
  • Run the display url-template { all | name template-name } command to check the configuration of the URL profile.
  • Run the display port connection-type access all command to check all current downlink interfaces on the device.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141885

Views: 58444

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next