No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R010C00 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating and Configuring a Domain

Creating and Configuring a Domain

Context

A NAS performs domain-based user management. A domain is a group of users and each user belongs to a domain. A user uses only AAA configuration information in the domain to which the user belongs.

The device determines the domain to which a user belongs based on the user name. Before performing authentication, authorization, and accounting on users, you need to create the domain to which the users belong.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run domain domain-name [ domain-index domain-index ]

    A domain is created and the domain view is displayed, or the view of an existing domain is displayed.

    By default, the default and default_admin domains are available on the device. The default domain is used by common access users and the default_admin domain is used by administrators.

  4. (Optional) Run state { active | block [ time-range time-name &<1-4> ] }

    The domain state is configured.

    By default, a domain is in active state after being created. When a domain is in blocking state, users in this domain cannot log in.

  5. (Optional) Run statistic enable

    Traffic statistics collection is enabled for users in the domain.

    By default, traffic statistics collection is disabled for users in a domain.

  6. (Optional) Configure the DNS function, which takes effect for all domains on the device.

    1. Run quit

      Return to the AAA view.

    2. Run domainname-parse-direction { left-to-right | right-to-left }

      The domain name resolution direction is configured.

      By default, a domain name is parsed from left to right.

    3. Run domain-name-delimiter delimiter

      The domain name delimiter is configured.

      By default, the domain name delimiter is @.

    4. Run domain-location { after-delimiter | before-delimiter }

      The position of a domain name is configured.

      By default, a domain name is placed behind the domain name delimiter.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141885

Views: 54555

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next