No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R010C00 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
802.1X Authentication

802.1X Authentication

As shown in Figure 3-10, users' network access needs to be controlled to ensure network security. Only authenticated users are allowed to access network resources authorized by the administrator.

Figure 3-10  Typical application of 802.1X authentication
The user terminal is a PC with 802.1X client software installed on it. The user can use the 802.1X client software to initiate an authentication request to the access device. After exchanging information with the user terminal, the access device sends the user information to the authentication server for authentication. If the authentication succeeds, the access device sets the interface connected to the user to the Up state and allows the user to access the network. If the authentication fails, the access device rejects the user's access request.
NOTE:

802.1X authentication results in the change of the interface state, but does not involve IP address negotiation or assignment. 802.1X authentication is the simplest authentication solution. However, the 802.1X client software must be installed on the user terminal.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141885

Views: 54239

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next