No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R010C00 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Portal Authentication

Portal Authentication

As shown in Figure 3-12, user terminals' network access needs to be controlled to ensure network security. Only authenticated users are allowed to access network resources authorized by the administrator.

Figure 3-12  Typical application of Portal authentication

If the user only requires Portal authentication using a web browser, enable Portal authentication on the access device.

When an unauthenticated user accesses the Internet, the access device redirects the user to the Portal authentication website to start Portal authentication. If the authentication succeeds, the access device sets the interface connected to the user to the Up state and allows the user to access the network. If the authentication fails, the access device rejects the user's access request.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141885

Views: 54744

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next