No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R010C00 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Should I Be Aware of When Connecting the Device to a Symantec RADIUS Server?

What Should I Be Aware of When Connecting the Device to a Symantec RADIUS Server?

  • The Symantec RADIUS server can only be used as an authentication server, not as an authorization or accounting server. For this reason, when the device connects to a Symantec RADIUS server, ensure that the RADIUS server is not configured as an authorization or accounting server.
  • When the Symantec RADIUS server performs 802.1X authentication for users, perform the following configurations on the device:
    • Run the undo dot1x handshake command to disable handshake between the device and 802.1X online users.

    • Run the dot1x authentication-method eap command to configure EAP relay authentication for 802.1X users.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141885

Views: 55207

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next