No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R010C00 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Log Suppression Function for Users Authenticated Through the Built-in Portal Server

(Optional) Configuring the Log Suppression Function for Users Authenticated Through the Built-in Portal Server

Context

The device generates logs when users authenticated through the built-in Portal server fail to go online or offline. If a user fails to go online or offline, the user attempts to go online or offline repeatedly, and the device generates a large number of logs within a short time. This results in a high failure rate in the statistics and degrades the system performance. You can enable the log suppression function for users authenticated through the built-in Portal server. The device then only generates one log if a user fails to go online or offline within a suppression period.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run portal local-server syslog-limit enable

    The log suppression function is enabled for users authenticated through the built-in Portal server.

    By default, the log suppression function is enabled for users authenticated through the built-in Portal server.

  3. (Optional) Run portal local-server syslog-limit period value

    The log suppression period is configured for users authenticated through the built-in Portal server.

    By default, the log suppression period is 300 seconds for users authenticated through the built-in Portal server.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141885

Views: 58254

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next