No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R010C00 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Maximum Number of Concurrent Access Users for 802.1X Authentication on an Interface

(Optional) Setting the Maximum Number of Concurrent Access Users for 802.1X Authentication on an Interface

Context

The administrator can set the maximum number of concurrent access users for 802.1X authentication on the interface. When the number of access users reaches the maximum number allowed, new users for 802.1X authentication cannot access networks through the interface.
NOTE:
  • If the number of current online users on an interface has exceeded the maximum number, online users are not affected but new access users are limited.
  • This function is effective only when the MAC address-based access mode is configured on the interface. When the interface-based access mode is configured on the interface, the maximum number of concurrent access users on the interface is automatically set to 1. In this case, after one user is authenticated on the interface, other users can go online without being authenticated.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Set the maximum number of concurrent access users on an interface in the system or interface view.

    • In the system view:

    1. Run dot1x max-user user-number interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10>

      The maximum number of concurrent access users is set for 802.1X authentication on the interface.

    • In the interface view:

    1. Run interface interface-type interface-number

      The interface view is displayed.

    2. Run dot1x max-user user-number

      The maximum number of concurrent access users is set for 802.1X authentication on the interface.

    By default, the number of 802.1X authentication users is the maximum number of 802.1X authentication users supported by the device.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141885

Views: 54247

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next