No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R010C00 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Recording Scheme

(Optional) Configuring a Recording Scheme


Improper operations by a network administrator may sometimes cause a network failure. After HWTACACS authentication and authorization are configured, the server can record administrator's operations. These records can be used to locate the problem if a network failure occurs.


  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run recording-scheme recording-scheme-name

    A recording scheme is created and the recording scheme view is displayed.

    By default, no recording scheme is configured on the device.

  4. Run recording-mode hwtacacs template-name

    The recording scheme is associated with the HWTACACS server template.

    By default, a recording scheme is not associated with any HWTACACS server template.

  5. Run quit

    The AAA view is displayed.

  6. Run cmd recording-scheme recording-scheme-name

    A policy is configured to record the commands that have been executed on the device.

    By default, the commands used on the device are not recorded.

  7. Run outbound recording-scheme recording-scheme-name

    A policy is configured to record connection information.

    By default, connection information is not recorded.

  8. Run system recording-scheme recording-scheme-name

    A policy is configured to record system events.

    By default, system events are not recorded.

Updated: 2019-08-21

Document ID: EDOC1000141885

Views: 58028

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next