No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R010C00 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling 802.1X Authentication

Enabling 802.1X Authentication

Context

The 802.1X configuration takes effect on an interface only after 802.1X authentication is enabled globally and on the interface.

If there are online users who log in through 802.1X authentication on the interface, disabling the 802.1X authentication is prohibited.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run dot1x enable

    Global 802.1X authentication is enabled.

    By default, global 802.1X authentication is disabled.

  3. Enable 802.1X authentication on the interface in the system or interface view.

    • In the system view:

    1. Run dot1x enable interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10>

      802.1X authentication of the interface is enabled.

    • In the interface view:

    1. Run interface interface-type interface-number

      The interface view is displayed.

    2. Run dot1x enable

      802.1X authentication of the interface is enabled.

    By default, 802.1X authentication of an interface is disabled.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141885

Views: 55107

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next