No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R010C00 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why an 802.1X User Cannot Obtain an IP Address After Passing Authentication?

Why an 802.1X User Cannot Obtain an IP Address After Passing Authentication?

If VLAN authorization is configured on the authentication server and the VLAN that the DHCP server belongs to is an authorization VLAN, the type of the interface that the 802.1X user connects to must be hybrid. Otherwise, the user cannot obtain an IP address after passing the authentication.

To modify the interface type to hybrid, perform the following configurations (using GE0/0/1 as an example):

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo port link-type
[HUAWEI-GigabitEthernet0/0/1] port link-type hybrid
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141885

Views: 54448

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next