No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S7700 and S9700 V200R010C00

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a Device Through Telnet

Logging In to a Device Through Telnet

Context

After completing Telnet server configurations on a device, you can use either Telnet software or Windows Command Prompt on a PC to log in to the device. Assume that AAA authentication is configured and the management IP address of the device is 10.137.217.177. The Windows Command Prompt is used as an example to illustrate the Telnet login process.

Procedure

  1. Enter the Windows Command Prompt window.
  2. Run the telnet ip-address command to log in to the device using Telnet.

    C:\Documents and Settings\Administrator> telnet 10.137.217.177

  3. Press Enter and enter the password and user name configured for AAA authentication. The system does not provide a default user name and password. If authentication succeeds, the CLI is displayed, indicating that you have successfully logged in to the device. (The following information is for reference only.)

    Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
    
    Login authentication
    
    
    Username:admin1234
    Password:
    Info: The max number of VTY users is 20, and the number                         
          of current VTY users on line is 1.                                        
          The current login time is 2013-12-16 16:46:42+08:00. 
    <HUAWEI>      

Checking the Configuration

  • Run the display users [ all ] command to check the user interface connections.
  • Run the display tcp status command to check all TCP connections.
  • Run the display telnet server status command to check current Telnet server connections.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141895

Views: 54474

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next