No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S7700 and S9700 V200R010C00

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Forward Commands to Be Run in the Upper-level View

Enabling Forward Commands to Be Run in the Upper-level View

When you run a forward command not registered in the current view, the system automatically switches to the upper-level view to search for the command. If the command is found in that view, the system runs the command. If the command is not found in that view, the system continues the search in the next upper-level view until the system view.

Procedure

  1. In the user view, run:

    terminal command forward matched upper-view

    Forward commands are enabled to be run in the upper-level view.

    NOTE:
    The terminal command forward matched upper-view command is valid for current login users who run this command.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141895

Views: 61751

Downloads: 219

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next