No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S7700 and S9700 V200R010C00

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deploying Unconfigured Devices Using the Commander

Deploying Unconfigured Devices Using the Commander

There are two methods for deploying unconfigured devices using the Commander, depending on whether the network topology collection function is enabled on the Commander.

When the network topology collection function is enabled, users do not need to manually collect such information as device's MAC address or ESN; the Commander automatically collects device information and assigns client IDs to devices to bind device information with devices.

When the network topology collection function is disabled, users need to manually collect each device's MAC address or ESN and specify the binding relationship between client ID and device.

Pre-configuration Tasks

Before deploying unconfigured devices using the Commander, complete the following tasks:

  • If the network topology collection function is disabled:

    • Ensure that reachable routes exist between the DHCP server, file server, Commander, and clients with IP addresses assigned.

    • Collect each unconfigured device's MAC address or ESN by viewing the barcode label on the device.

  • If the network topology collection function is enabled:

    • Ensure that reachable routes exist between the DHCP server, file server, Commander, and clients with IP addresses assigned.

    • Power on and start the clients.

Procedure

Perform the following operations in sequence.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141895

Views: 57534

Downloads: 214

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next