No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S7700 and S9700 V200R010C00

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
File System Submenu

File System Submenu

In the BootROM main menu, select 6 to access the file system submenu.

             MAIN  MENU

     1. Boot with default mode
     2. Boot from Flash
     3. Boot from CFCard
     4. Enter serial submenu
     5. Enter ethernet submenu
     6. Enter file system submenu
     7. Enter test submenu
     8. Enter password submenu
     9. Modify Flash description area
    10. Clear password for console user
    11. Reboot

Enter your choice(1-11): 6
            FILE SYSTEM SUBMENU

     1. Erase flash                  2. List files in flash
     3. Delete file from flash       4. Format flash
     5. List files in CFcard         6. Delete file from CFcard
     7. Rename file in CFcard        8. Fdisk CFcard
     9. Format CFcard               10. Chkdsk CFcard
    11. Return to main menu
Table 10-5  File system submenu

Item

Description

1. Erase Flash

Erases the flash memory. All information are deleted from the flash memory.

After the device is deployed in a new environment, you can erase the flash memory.

2. List files in flash

Displays files in the flash memory, flash memory space, and available space.

3. Delete file from flash

Deletes a specified file from the flash memory. You can delete useless files to increase available flash space.

4. Format flash

Formats the flash memory.

If the flash memory fails, format the flash memory to rectify the fault. If the fault persists, contact technical support personnel.

After the flash memory is formatted, all files in the flash memory are deleted.

5. List files in CFcard

Displays files in the CF card, total space, and available space of the CF card.

6. Delete file from CFcard

Deletes a specified file from the CF card. You can delete useless files to increase available space of the CF card.

7. Rename file in CFcard

Renames files.

8. Fdisk CFcard

Repartitions the CF card. After you perform this operation, the CF card is formatted.

9. Format CFcard

Formats the CF card. You can rectify a fault, for example, information in the CF card incorrectly read, by formatting the CF card.

After you perform this operation, all the files in the CF card including the system software are deleted. You need to upload the system software again.

10. Chkdsk CFcard

Checks the CF card status. If the device is faulty, perform this operation to check whether the fault is caused by the CF card.

11. Return to main menu

-

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141895

Views: 51989

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next