No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S7700 and S9700 V200R010C00

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Web System Login Configuration Tasks

Web System Login Configuration Tasks

You can configure login through the web system in simple mode or secure mode.

Table 6-1 describes configuration tasks of web system login.

Table 6-1  Configuration tasks of web system login

Scenario

Description

Section

Simple Mode

Configure device login through the web system

The device provides a default SSL policy, and the web page file contains a self-signed certificate that is randomly generated. If the default SSL policy and self-signed certificate meet security requirements, you do not need to upload a digital certificate or configure an SSL policy. The configuration of this mode is simple but poses security risks. It applies to scenarios that do not have high security requirements.

Configuring Device Login Through the Web System (Simple Mode)

Secure Mode

Configure device login through the web system

To avoid potential security risks, you can acquire a trust digital certificate and private key file from the CA and manually configure an SSL policy. This mode requires more complex configuration but provides high security. You are recommended to use this mode to configure device login through the web system.

Configuring Device Login Through the Web System (Secure Mode)

Configure access control on web users

To enhance security, you can configure access control on web users to specify clients that can log in to the device through the web system.

Configuring Access Control on Web Users
NOTE:

The device does not provide lifetime management for the self-signed digital certificate, such as update and revocation. To ensure device and certificate security, you are recommended to replace the self-signed certificate with a certificate authority (CA) certificate.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141895

Views: 62384

Downloads: 221

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next