No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S7700 and S9700 V200R010C00

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Backing Up the Configuration File

Example for Backing Up the Configuration File

Networking Requirements

As shown in Figure 8-2, a user logs in to the device and backs up the configuration file to the TFTP server. Therefore, the configuration file can be recovered in case that the device is damaged.

Figure 8-2  Networking diagram of backing up the configuration file

Configuration Roadmap

The configuration roadmap is as follows:

  1. Save the configuration file.

  2. Back up the configuration file using TFTP.

    Configuration file backup using TFTP is simple, but there are security risks. In scenarios with high security requirements, configuration file backup using FTPS, SFTP, or SCP is recommended. The following describes the configuration file backup process using TFTP as an example.

Procedure

  1. Save configurations to the config.cfg file.

    <HUAWEI> save config.cfg

  2. Back up the configuration file using TFTP.
    1. Start the TFTP server program.

      Start the TFTP server program on the PC. Set the path for transmitting the configuration file, and the IP address and port number of the TFTP server.

    2. Transfer the configuration file.

      # Run the tftp command in the user view to back up the specified configuration file.

      <HUAWEI> tftp 10.110.24.254 put cfcard:/config.cfg backup.cfg

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141895

Views: 57537

Downloads: 214

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next