No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S7700 and S9700 V200R010C00

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
First Login Overview

First Login Overview

This section describes first login modes supported by the device and the corresponding basic configuration.

Before configuring a new device, you must log in to the device locally. The device supports first login through the console port.

After login, configure the system time, device name, management IP address, and user level and authentication mode for Telnet users to facilitate subsequent configuration.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141895

Views: 51817

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next