No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S7700 and S9700 V200R010C00

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Change the Password for Web Login?

How Do I Change the Password for Web Login?

If you forget or want to change the web login password, log in to the switch through the console port, Telnet, or STelnet and set a new password after login.

The Telnet protocol has security vulnerabilities. It is recommended that you log in to the device through the console port or using STelnet V2.

# Set the user name and password to admin123 and Huawei@123, respectively.

<HUAWEI> system-view
[HUAWEI] aaa
[HUAWEI-aaa] local-user admin123 password irreversible-cipher Huawei@123
[HUAWEI-aaa] local-user admin123 service-type http
[HUAWEI-aaa] local-user admin123 privilege level 15
[HUAWEI-aaa] return
<HUAWEI> save
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141895

Views: 61440

Downloads: 219

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next