No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S7700 and S9700 V200R010C00

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the ISSU Rollback Timer

(Optional) Configuring the ISSU Rollback Timer

Context

The system activates the ISSU rollback timer when entering the ISSU check phase. If the ISSU rollback timer expires before the system enters the ISSU switchover phase, the system rolls back to the old version.

Procedure

  1. Run the issu timer rollback time command in the user view to configure the ISSU rollback timer.

    By default, the ISSU rollback timer is 120 minutes.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141895

Views: 51315

Downloads: 208

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next