No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R010C00

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to Policy-based Routing

Introduction to Policy-based Routing


Policy-based routing (PBR) allows switches to select routes based on user-defined policies.

  • Differences between PBR and routing policies are:
    • PBR changes the forwarding path of packets based on user-defined policies instead of the routes in an IP routing table.
    • Routing policies change the forwarding path of packets by filtering routes and setting route attributes. For example, route attributes (including reachability) can be set to change the forwarding path of network traffic.


Traditionally, devices search their IP routing tables for routes of packets based on packets' destination addresses and then forward the packets. PRB allows switches to route packets based on user-defined policies.


PBR has the following advantages:

  • Allows network administrators to make user-defined policies for routing packets, which improves route selection flexibility.
  • Enables different data flows to be forwarded on different links, which increases link efficiency.
  • Uses cost-effective links to transmit service data without affecting service quality, which reduces the cost of enterprise data services.
Updated: 2019-08-21

Document ID: EDOC1000141900

Views: 191844

Downloads: 194

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next