No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R010C00

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration

Default Configuration

Table 7-8 describes the default configuration of IPv4 IS-IS.

Table 7-8  Default configuration of IPv4 IS-IS
Parameter Default Configuration
IS-IS Disabled
DIS priority 64
Device level Level-1-2
Interval for sending Hello packets 10s
Minimum interval for sending LSPs 50 ms
Maximum number of LSPs to be sent 10
Interval for updating LSPs 900s
Maximum lifetime of LSPs 1200s
Bandwidth reference value 100 Mbit/s
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141900

Views: 182017

Downloads: 192

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next