No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R010C00

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for MPLS OAM

Licensing Requirements and Limitations for MPLS OAM

Involved Network Elements

Other network elements are not required.

License Requirements

You can use the MPLS OAM feature only after the MPLS function is enabled. The MPLS function is controlled by a license. By default, MPLS is disabled on a new device. To use the MPLS function, apply for and purchase the license from the equipment supplier.

For details about how to apply for a license, see S Series Switch License Use Guide.

Version Requirements

Table 6-1  Products and versions supporting MPLS OAM

Product

Product Model

Software Version

S7700

S7703, S7706, S7712

V100R003C01, V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10

S9700

S9703, S9706, S9712

V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C10

NOTE:
To know details about software mappings, see Hardware Query Tool.

Feature Limitations

  • The SA, FC, SC series cards, and EH1D2X48SEC0 card do not support MPLS OAM.
  • In V200R006 and earlier versions, the X1E series cards do not support MPLS OAM. In V200R007 and later versions, the X1E series cards support MPLS OAM.

  • The XGE interface connected to ACU2, ET1D2IPS0S00, ET1D2FW00S00, ET1D2FW00S01, or ET1D2FW00S02 card does not support MPLS OAM.

  • When the device has ES0D00FSUA00 subcards installed on the MPUs or has EH1D2SRUDC00/EH1D2SRUDC01 MPUs installed, MPLS OAM cannot detect faults of a tunnel in the penultimate hop popping scenario.

  • MPLS OAM cannot be enabled on a switch in the following situations:
    • The MPU of the switch has an ES0D00FSUA00 subcard installed or the MPU is EH1D2SRUDC00/EH1D2SRUDC01.
    • The number of port mirroring entries configured on an LPU reaches the limit.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141902

Views: 73165

Downloads: 189

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next