No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R010C00

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Basic Concepts

Basic Concepts

LDP Peers

Two LSRs that use LDP to establish an LDP session and exchange label messages are called LDP peers. LDP peers learn labels from each other over the LDP session between them.

LDP Adjacency

When an LSR receives a Hello message from its peer, an LDP adjacency is established. Two types of LDP adjacencies are used:
  • Local adjacency

    Discovered by multicasting a Hello message (Link Hello message).

  • Remote adjacency

    Discovered by unicasting a Hello message (Targeted Hello message).

LDP maintains peer information based on adjacencies. The peer type is defined by the type of LDP adjacency. A peer can be maintained by multiple adjacencies. If a peer is maintained by both local and remote adjacencies, the peer type is coexistent local and remote.

LDP Session

LSRs exchange messages, such as label mapping and release messages, over LDP sessions. LDP sessions are only established between LDP peers. LDP sessions are classified into the following types:

  • Local LDP session

    Established between two directly connected LSRs.

  • Remote LDP session

    Established between two directly or indirectly connected LSRs.

The local and remote LDP sessions can coexist.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141902

Views: 70361

Downloads: 189

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next