No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R010C00

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Global MPLS

Enabling Global MPLS


You can perform other MPLS configurations only after enabling global MPLS.

Perform the following steps on each node in an MPLS domain.


  1. Run:


    The system view is displayed.

  2. Run:


    MPLS is enabled globally and the MPLS view is displayed.

    By default, no node is enabled with MPLS.

Updated: 2019-08-21

Document ID: EDOC1000141902

Views: 73254

Downloads: 189

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next